After overhauling the master brake cilinder of our GMC we have the problem that the first push of the brake padel goes to the floor.
Brakes are bled, reservoir is full, only the first stroke goes to the floor, the second push brake feels good. After releasing the brake padel and waiting a few seconds the brake padel goes to the floor again.
Any sugestions what cloud couse this problem? No alternations where made in adjustment screws. Onley seals, and spring are replaced.
Thanks for you help,
Rik
Brake pedal to the floor
-
- Second Lieutenant
- Posts: 40
- Joined: Wed Mar 19, 2008 1:53 pm
- Location: The Netherlands
- Contact:
Brake pedal to the floor
We have our truck since 2002 and have taken it completly apart and put it together in 2 years. See our website for the adventures.
http://home.hetnet.nl/~gerards_j/
http://home.hetnet.nl/~gerards_j/