CCKW wiper arms
-
- Draftee
- Posts: 4
- Joined: Sun Jul 17, 2016 11:37 am
CCKW wiper arms
Recently acquired a 352 that has replacement wiper motors fitted to convert to electric rather than air operated. I have tried to show a picture of the spindle hoping someone out there can advise what arms I need but any attempt to add the file via 'attachments' comes up with an error message telling me invalid file extension even though its saved as a simple word document and quite happily attaches to regular email. Help !
-
- Brigadier General
- Posts: 2367
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Tilton, NH
- Contact:
Re: CCKW wiper arms
You can only save picture files. jpg is best. Must be a small file size.
1945 GMC DUKW
1942 Chevy 125 Crash Truck from Dow AAFB,
1944 Chevy 325 Fire Truck
1942 WC-54 Ambulance
1944 M29C Weasel (x6)
1945 CCKW 353 A2 Open Cab "Air-portable"
1943 M5 High Speed Tractor
1942 Sperry Searchlight setup with GE Generator
1942 M-1 Fruehauf Searchlight Trailer (G221)
1942 M-17 Fruehauf Quad 50 Trailer (G221)
1942 M-10 Ammo Trailer (x3)
194? Steel Ben Hur (x4) 194? Wood Ben Hur (x2)
1945 Case VAIW-3 Aircraft Tug
1943 Case VAI USAAF with Mower
1944 Clark CA-1 Airborne Dozer
1944 PE-95G, 1944 PE-99B
1942 Chevy 125 Crash Truck from Dow AAFB,
1944 Chevy 325 Fire Truck
1942 WC-54 Ambulance
1944 M29C Weasel (x6)
1945 CCKW 353 A2 Open Cab "Air-portable"
1943 M5 High Speed Tractor
1942 Sperry Searchlight setup with GE Generator
1942 M-1 Fruehauf Searchlight Trailer (G221)
1942 M-17 Fruehauf Quad 50 Trailer (G221)
1942 M-10 Ammo Trailer (x3)
194? Steel Ben Hur (x4) 194? Wood Ben Hur (x2)
1945 Case VAIW-3 Aircraft Tug
1943 Case VAI USAAF with Mower
1944 Clark CA-1 Airborne Dozer
1944 PE-95G, 1944 PE-99B
-
- Draftee
- Posts: 4
- Joined: Sun Jul 17, 2016 11:37 am
Re: CCKW wiper arms
Hopefully the picture now works, original was just too big a file. I am hoping someone out there may be able to identify a likely wiper arm that would fit the spindle. New motors fitted to replace original vacuum operation and the thread takes a 6mm nut although oddly the other one appears to be an older motor with a 1/4" shaft as a modern M6 nut doesn't quite work (1/4" = 6.3mm I think) ! Just need something that works for now in case it rains and will worry about authenticity later.
You do not have the required permissions to view the files attached to this post.
-
- Draftee
- Posts: 2
- Joined: Mon Aug 29, 2016 1:20 pm
Re: CCKW wiper arms
It looks very much like a Series Land Rover wiper, or early Defender style.