http://www.oldgmctrucks.com/photos/valveadjustment.txt
We can do the other manner too:1)Warm up the engine,turn off the engine(not running),put the pulley in cylinder#1 at TDC-adjust two #1 valves.2)turn the pulley 120 degrees-adjust two #5 valves.3)turn the pulley 120 degrees-adjust two #3 valves.4)turn the pulley 120 degrees-adjust two #6 valves.5)turn the pulley 120 degrees-adjust two #2 valves.6)turn the pulley 120 degrees-adjust two #4 valves.Intake valve=0,012" and exhaust valve=0,016".
270 cid adjusting valves.
-
- Lieutenant Colonel
- Posts: 762
- Joined: Tue Jan 02, 2007 3:29 pm
- Location: Santiago-RS-Brasil
270 cid adjusting valves.
Jeep Willys MB DoD dec,16 1942 s/n:196275
Dodge B3-B 4x2 1952 s/n:90099559
CCKW 353 Banjo 1944 s/n:309623
Dodge B3-B 4x2 1952 s/n:90099559
CCKW 353 Banjo 1944 s/n:309623