Page 1 of 1
WHEEL TRIVIA-FROM THE MOTOR SARGEANT
Posted: Sat Apr 16, 2005 9:03 pm
by joel gopan
Now if you want to be really correct, when you mount your Duals, the Handholes in the wheels should be lined up so that the Valve Stems in the Inside and Outside Wheels are 180 Degrees apart. For you Jeep nuts, there is also a rule for the Valve Stem on your Spare, you have a choice of either 2 O'Clock, or 10 O'Clock.
Joel
Posted: Mon Apr 18, 2005 4:14 pm
by armydriver
Thanks Joel. good information.
Posted: Mon Apr 18, 2005 5:50 pm
by joel gopan
The same Army you served in taught me that.
Joel
Re: WHEEL TRIVIA-FROM THE MOTOR SARGEANT
Posted: Fri Nov 19, 2010 8:41 am
by Fernando Mendes
joel gopan wrote:Now if you want to be really correct, when you mount your Duals, the Handholes in the wheels should be lined up so that the Valve Stems in the Inside and Outside Wheels are 180 Degrees apart. For you Jeep nuts, there is also a rule for the Valve Stem on your Spare, you have a choice of either 2 O'Clock, or 10 O'Clock.
Joel