Page 1 of 1
Fuel pump
Posted: Tue Sep 23, 2008 5:27 pm
by KIH
Hi - anyone tried to replace org. fuel pump with a 6 volt inline by pass pump. ? A friend of mine did recommend this cheap and easy solution but I would like some more opinions. If succesfully done - a NAPA no. or other type ID would be much appreciated.
Thanks
Posted: Tue Sep 23, 2008 7:36 pm
by Bill_Wolf
Kim,
I used a 6 volt pump until I switched to 12 volt (still use the same type of pump in 12v version).
The 6V pump number is E8011
It looks like this:
Bill
Posted: Tue Sep 23, 2008 7:54 pm
by dr deuce
make sure you have fuel filter in front of the pump.
Posted: Tue Sep 23, 2008 10:11 pm
by abn CCKW
whats the make and source of the pump ?
Posted: Tue Sep 23, 2008 11:17 pm
by Bill_Wolf
abn CCKW wrote:whats the make and source of the pump ?
It is made by a company called Airtex.
http://www.airtexproducts.com/catalog.html
It should be available world wide from many sources.
Bill
Posted: Wed Sep 24, 2008 5:34 am
by KIH
Thanks everyone - I'm impressed
