WATER PUMP REPAIR
-
- First Lieutenant
- Posts: 71
- Joined: Fri Oct 13, 2006 5:27 pm
- Location: ENGLAND
WATER PUMP REPAIR
Hello All,Has anyone managed to change the seals on a water pump? what is the only way to cure a leak that appears to coming thru the impeller shaft seal(when the engine has been run and warmed up when switched off its leaks badly) when running it is almost sealed and minimal leakage.ANY tips on" how to"or is the best to try and get N.O.S. pump????
-
- First Lieutenant
- Posts: 141
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Netherlands, Rucphen
I thought NAPA sells them new, others on the board should be able to help you out.
Good luck!
Good luck!
194x GMC cckwx353 Cargo (cab1574, turrethole, winch, SWB)
1944 GMC cckw353 Cargo
1944 GMC cckw353 Open toolset (complete)
1945 1-tons trailer (Ben Hur type) (sold)
194x 1-tons trailer (Ben Hur type)
1945 Willys MB
1945 1/4-tons Bantam T-3
1944 PE-95G Willys Generatorset
1972 AM General M35A2 (sold)
1968 M50A2 Water tanker (sold)
1944 GMC cckw353 Cargo
1944 GMC cckw353 Open toolset (complete)
1945 1-tons trailer (Ben Hur type) (sold)
194x 1-tons trailer (Ben Hur type)
1945 Willys MB
1945 1/4-tons Bantam T-3
1944 PE-95G Willys Generatorset
1972 AM General M35A2 (sold)
1968 M50A2 Water tanker (sold)
-
- First Lieutenant
- Posts: 118
- Joined: Thu Oct 05, 2006 12:33 am
- Location: Newcastle, NSW, Australia
what i can remember is that i repaired my water pump using a kit supplied by Ross Prince in Australia.
It included a new impellor, and did the trick, pretty sure the impellor shaft gets old and buggers the seal, so make sure you replace it
I also remember, that the pulley is flimsy and i warped it getting it off, and had to order a new one off him, make sure you follow the correct procedure as detailed in the manual
It included a new impellor, and did the trick, pretty sure the impellor shaft gets old and buggers the seal, so make sure you replace it
I also remember, that the pulley is flimsy and i warped it getting it off, and had to order a new one off him, make sure you follow the correct procedure as detailed in the manual
CCKW 353 w/winch
-
- First Lieutenant
- Posts: 71
- Joined: Fri Oct 13, 2006 5:27 pm
- Location: ENGLAND
WATER PUMP REPAIR
Thank you to the members that responded.If any one else is in need of a similar repair I have located a specialist repair company that has been repairing and refurbing ALL makes & models for over 40 years here in the U.K , if any member needs this service please contact me.
-
- Captain
- Posts: 249
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Solihull U.K
Can you send me the contact details please,I've rebuilt my water pump and it's been fine for a couple of years,need to do another one of my GMC's now though. Depends on the cost but might let someone else do it for me this time.
regards
Steve
regards
Steve
http://www.501para.net http://www.n44.co.uk
CCKW 352 1942 No 7 set
CCKW 353 1943 cargo
CCKW 353 1945 cargo under restoration
Dodge WC 51 1944
Ford GPW 1944
Morris LRC 1944 under restoration
Polsten Quad 1944
Willys M38A1 1963
CCKW 352 1942 No 7 set
CCKW 353 1943 cargo
CCKW 353 1945 cargo under restoration
Dodge WC 51 1944
Ford GPW 1944
Morris LRC 1944 under restoration
Polsten Quad 1944
Willys M38A1 1963
-
- First Lieutenant
- Posts: 71
- Joined: Fri Oct 13, 2006 5:27 pm
- Location: ENGLAND
WATER PUMP REPAIRS
CONTACT PAUL KING E.P. WATER PUMP 01902452914 THIS IS A U.K. NUMBER BUT HE WILL SERVICE [/b]ALL PUMPS. MINE HAS BEEN FINE
AND THE SERVICE IS BETTER THAN YOU CAN BELIVE
(JUST THE OIL PUMP TO FIX NOW)



-
- First Lieutenant
- Posts: 71
- Joined: Fri Oct 13, 2006 5:27 pm
- Location: ENGLAND
WATER PUMP REPAIRS
THE WATER PUMP REPAIR IS NOT DIFFICULT ,ITS JUST NOT THAT EASY TO GET IT RIGHT ESPECIALLY FIRST TIME.THE PULLY CAN REQUIRE THE ODD CURSE TO GET OFF THE SHAFT. THE LITTLE SWEETENER WITH E.P. IS THEY DO THE JOB (ITS WHAT THEY DO ALL DAY) FOR ABOUT £40 PLUS VAT..
BUT THE REALLY GOOD BIT .
... ITS A LIFETIME GUARANTEE
SO IF YOU HAVNT GOT ENOUGH JOBS TO DO ON THE REBUILD FINE ,BUT THIS IS ONE YOU CAN LEAVE TO EXPERTS AND IT WILL BE AS GOOD AS YOUR OWN WORK ,MAY BE EVEN A LITTLE BIT BETTER
UNLESS YOU KNOW AN "INN GIN EAR" AND THERE IS A LOT OF THOSE ABOUT ....APPARENTLY
BUT YOU ARE DEAD RIGHT ABOUT REX .HE OFFERS A GREAT SERVICE TO LOTS OF US AND IS ALWAYS VERY HELPFUL AND FORTHCOMING WITH HIS TIPS AND ADVICE AND IS A RECOMMENDED SOURCE FOR LOTS AND LOTS OF PARTS





-
- Lieutenant Colonel
- Posts: 762
- Joined: Tue Jan 02, 2007 3:29 pm
- Location: Santiago-RS-Brasil
Water pump leak.
I think it is only necessary do change are SEAL & WASHER to stop the leak.No more. 

Jeep Willys MB DoD dec,16 1942 s/n:196275
Dodge B3-B 4x2 1952 s/n:90099559
CCKW 353 Banjo 1944 s/n:309623
Dodge B3-B 4x2 1952 s/n:90099559
CCKW 353 Banjo 1944 s/n:309623