Floor
-
Warren Duchesne
- Second Lieutenant
- Posts: 40
- Joined: Tue Sep 15, 2009 12:15 pm
Floor
Can someone send me pictures of the center floor pannel that covers the transmission . A picture with the pannel out of a truck is what I need so I can see what holes are original and which ones I need to weld up . My truck is a open cab with winch . Or if someone has a nice one to sell . Thanks Warren Duchesne
-
chevy44
- First Lieutenant
- Posts: 50
- Joined: Sun Sep 20, 2009 8:08 am
- Location: belgium
Re: Floor
maby this helps: front center a big circel for the shifter knob right the space for the hand brake en transfer case knobs left side one crikel for the master cilinder en about 2 inch to the right one long hole for the PTO knob,
1945 willys MB "OREGON FOX"
1944 G7107 chevy "LITTLE BOY"
1943 gmc cckw 352 "WILD BOAR"
194? ben hur trailer
1944 G7107 chevy "LITTLE BOY"
1943 gmc cckw 352 "WILD BOAR"
194? ben hur trailer
-
R Cubed
- First Lieutenant
- Posts: 107
- Joined: Mon Jan 28, 2008 4:10 pm
- Location: U K South coast
Re: Floor
Here is a picture below of my very bad floor but it does show the correct holes, hope this is of help just ignore the rusty bits.Warren Duchesne wrote:Can someone send me pictures of the centre floor panel that covers the transmission . A picture with the panel out of a truck is what I need so I can see what holes are original and which ones I need to weld up . My truck is a open cab with winch . Or if someone has a nice one to sell . Thanks Warren Duchesne
You do not have the required permissions to view the files attached to this post.
Don't say can't as anything is possible with time and effort.
1941 CCKW352B1
GP Medium tent
105 M2-A1 Howitzer
1941 CCKW352B1
GP Medium tent
105 M2-A1 Howitzer
-
Warren Duchesne
- Second Lieutenant
- Posts: 40
- Joined: Tue Sep 15, 2009 12:15 pm
Re: Floor
Mine is not raised around the center hole and does not have the crease that runs accross . I am thinking that mine might be made in a metal shop as a replacement . I guess i need a nice one if someone has one for sale . Thanks Warren Duchesne
-
dr deuce
- Brigadier General
- Posts: 2400
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Pembroke NH
- Contact:
Re: Floor
That floor above is for a winch model with the extra slotted hole and hinge to lock the lever in neutral
Dr Deuce Over 50,000 driven miles in a CCKW
1942 CCKW closed cab shopvan
1943 CCKW closed cab cargo w/M32 MG mount
1944 CCKW open cab LeRoi Kompressor
1944 CCKW open cab F1 Aircraft fueler tanker
1945 CCKW open cab cargo w/artic cab
1942 Chev cargo
1942 Chev K51 Panel
1944 Chev M6 Bomb Truck
1942 GPW Jeep
http://home.comcast.net/~cckw/wsb/html/ ... 59870.html
1942 CCKW closed cab shopvan
1943 CCKW closed cab cargo w/M32 MG mount
1944 CCKW open cab LeRoi Kompressor
1944 CCKW open cab F1 Aircraft fueler tanker
1945 CCKW open cab cargo w/artic cab
1942 Chev cargo
1942 Chev K51 Panel
1944 Chev M6 Bomb Truck
1942 GPW Jeep
http://home.comcast.net/~cckw/wsb/html/ ... 59870.html
-
R Cubed
- First Lieutenant
- Posts: 107
- Joined: Mon Jan 28, 2008 4:10 pm
- Location: U K South coast
Re: Floor
Yup, that's the one he was after in his original post, as you can all see from my one I too need a NOS one, if no success I will repair this one but will be a lot of work, not that that is a problem just time consuming.
Don't say can't as anything is possible with time and effort.
1941 CCKW352B1
GP Medium tent
105 M2-A1 Howitzer
1941 CCKW352B1
GP Medium tent
105 M2-A1 Howitzer
-
bluebell21
- Private
- Posts: 7
- Joined: Fri May 08, 2009 4:42 am
- Location: australia N.S.W.
Re: Floor
Has any body got drawings or templates of floors for all models of the CCKW. I would be willing to buy a plan for my truck.
Regards bluebell21, P.S. I think someone could make a few dollars here.
Regards bluebell21, P.S. I think someone could make a few dollars here.