Frame Serial Number Location
Posted: Mon Jul 03, 2006 10:53 am
Where is (if there is) the stamped serial number located at on the frame of a longwheel base 1945 GMC CCKW 
Thanks 
Thanks The GMC CCKW
This is a discussion forum on the GMC World War 2 era 2.5 ton truck...the CCKW.
https://www.cckw.org/forum/
Frame Serial Number Location
Page 1 of 1
Posted: Mon Jul 03, 2006 1:08 pm
R.H. chassis frame near front axle
Posted: Tue Jul 04, 2006 6:24 pm
HI CONN
Have you found your ser# yet sometime they can be hard to see filled in with several layers of paint , you may have to use a 4 1/2 grinder with a wire cup brush. It should be on the RH frame on the flat part of the frame just before the bumper forward of the tire 
I used a sharp metal pick to clean the paint out of mine and now you can see it with ease 
Have you found your ser# yet
sometime they can be hard to see filled in with several layers of paint , you may have to use a 4 1/2 grinder with a wire cup brush. It should be on the RH frame on the flat part of the frame just before the bumper forward of the tire I used a sharp metal pick to clean the paint out of mine and now you can see it with ease !
Posted: Wed Jul 05, 2006 5:50 pm
Yes, Thank You. I found it, had to use a puddy knife, and some steal wool.
The "H1" following the #, helped me determine it was a tipper or dump truck...now I just need to find a dump bed.
Thanks again.
The "H1" following the #, helped me determine it was a tipper or dump truck...now I just need to find a dump bed.
Thanks again.