Troop seat brackets

dr deuce · Post by **dr deuce** » Mon May 16, 2005 8:50 pm

Did I hear someone (Joel?) say that the M-Series troop seat brackets are different (as in will not fit) a CCKW or Chevy?

Steve AKA Dr Deuce

joel gopan · Post by **joel gopan** » Mon May 16, 2005 8:55 pm

That is right, there is an offset problem. They are different, but could be used if the racks were made from scratch. M-Series bracketd are not a "bolt on" thing as they are made different. The supports for the lazy backs have the same problem, different btackets.
Joel

armydriver · Post by **armydriver** » Tue May 17, 2005 7:51 am

Thanks for the info. Joel.

dr deuce · Post by **dr deuce** » Tue May 17, 2005 8:56 am

Joel:

Just so I/we understand:

You can use M-series troop seat metal brackets etc IF you are using new wood/building it from scratch?

Thanks
Steve AKA Dr Deuce

joel gopan · Post by **joel gopan** » Tue May 17, 2005 10:03 am

Yes, and the CCKW parts will not retrofit into the holes that were drilled for the M-series parts. Same for the head boards, the hardware is unique to M-Series. You wil have a custom job, and it will look OK I have NOS M-Series troop Racks, and have shown many owners who would not believe me. Bow Corners remained identical over 60 years, except for dropside. I Have Corners and the special screws.
Joel

rgus · Post by **rgus** » Tue May 17, 2005 10:23 am

Joel;

Please don't forget my list of parts I sent you.

dr deuce · Post by **dr deuce** » Tue May 17, 2005 10:35 am

You can also use the M-Series wooden bows by removing about 4" from each end (do 2 cuts, not one 8" cut) and redrilling the holes.

Steve AKA Dr Deuce

joel gopan · Post by **joel gopan** » Tue May 17, 2005 2:51 pm

Only slight detail, is that CCKW Bows had more pronounced arc(shorter Radius) than M-Series.
Joel

Ledog · Post by **Ledog** » Tue May 17, 2005 3:21 pm

Joel, do you have some bow corners for sale? I'm looking for 10 corners for my CCKW. I should be able to find a carpenter who can make the wood part of the bows.

joel gopan · Post by **joel gopan** » Tue May 17, 2005 10:39 pm

I have NOS Bow Corners, and the special Army Issue Screws that go with them(5 per corner). The Screws are same Ordnance Part number, but have evolved into a slightly thicker head.
Joel

The GMC CCKW

Troop seat brackets

Troop seat brackets

CCKW bows