Page 1 of 1

gmc cab or chevy cab

Posted: Sun Nov 01, 2009 5:23 pm
by KEVINABR
Hi all
Probably been posted before :) :) :) ......Which came first gmc cab or chevrolet cab. :?: :?:

Re: gmc cab or chevy cab

Posted: Tue Nov 03, 2009 7:29 pm
by dr deuce
I believe that the earliest Chev is Oct 1940 and the earliest CCKW is Jan 1941. That is not counting the ACKWX which though it looks the same is actually a different cab.

Re: gmc cab or chevy cab

Posted: Wed Nov 04, 2009 10:30 am
by G506
Are you generally just curious about this subject, or is there further information you need Kevin?
Cheers
G506

Re: gmc cab or chevy cab

Posted: Wed Nov 04, 2009 3:16 pm
by KEVINABR
Hi just a little curious because my cab is not to good and been thinking if i cant source a good chevy one i might be able to get a cckw one but are they the same,????????? i know the cab back section lower is slightly different :)
Any thoughts ???

Re: gmc cab or chevy cab

Posted: Wed Nov 04, 2009 7:13 pm
by dr deuce
There will be some firewall differences due to the oil filter on the CCKW and not on the Chev

Also the back of the cab inside on the CCKW has mounts to bild down the back of the seat. The Chev uses a system where the back hooks into the bottom with tabs (poor system). On mine, I have removed the hooks on the seat back and added a couple thicknesses of 2x4 so that they rest on the back wall of the cab. You will be MUCH happier.

Re: gmc cab or chevy cab

Posted: Thu Nov 05, 2009 5:27 pm
by KEVINABR
many thanks doc lokks as though ive got some tin work to do :D :D :D

Re: gmc cab or chevy cab

Posted: Thu Nov 05, 2009 5:35 pm
by G506
KEVINABR wrote:many thanks doc lokks as though ive got some tin work to do :D :D :D
If it's any help Kevin, RANGER on the Dodge forum sold me a set of repair panels for the front lower cab sides (where the front wings/fenders bolt onto the cab), a superb fit, and look great. As for the rest of the cab, mine took me months and months of beating out dents, welding small rust holes, cutting out sections and welding new in. Very time consuming, but I'm really pleased with the results.
If you can weld/grind/wield a hammer its far more satisfying to repair what you already have rather than just bolt a replacement in place (IMHO)
:D

Re: gmc cab or chevy cab

Posted: Mon Dec 07, 2009 8:09 pm
by Fernando Mendes