The GMC CCKW

I would like to buy NOS or good condition T.O. floorboard for the Chevy G506 1-1/2 ton truck. Mine is a winch model, but would take winch or no winch floor board.

I would alternately consider floor board patch panel (mangled, cut, rust etc. as lon as the drivers side front corner is in decent condition. Mine has the toeboard ledge and drivers side front stiffener rusted out.

I'm also looking for the following items:
interior rearview mirror bracket
back window screen
radiator fan shroud (sheetmetal box, with large round hole for the fan), LH (drivers side)lower inner fender. This is a about 6" - 8" wide and has a number of louvers in it.

Let me know if you have any of these for sale...

Hey Retro

I've got some of that stuff
Screens
Radiator shrouds
Lower hood panel I have both avail.

As for the floor board
If you are going to fab a new one ( rather complicated) you could modify a floor panel for a closed cab CCKW the perimiter and profile is the same however all the penetrations will need to be modified.
I also have an NOS CCKW floor pan (closed cab )avail.

Let me know via PM or E-Mail
Hope this helps
John

BTT

I've got all of it...

See this post..
viewtopic.php?t=3361

Thanks