cylinder head water by-pass tube
Posted: Fri Apr 10, 2009 11:28 pm
would any one have a tube that is in reasonable shape for sale...or is this just a remake your own issue?? 
The GMC CCKW
This is a discussion forum on the GMC World War 2 era 2.5 ton truck...the CCKW.
https://www.cckw.org/forum/
cylinder head water by-pass tube
Page 1 of 1
Posted: Sat Apr 11, 2009 7:17 am
The tube is an odd (by today) size. I doubt you will find tuning. On one of mine, I went to 3/8". The original I believe is 7/16" diameter
Posted: Sat Apr 11, 2009 8:40 am
Hi Brad
Give Frank von Rosensteil a try I believe he has them avail NOS
I have made some using 1/2" steel tubing and fittings avail from NAPA but the radius of one of the bends requires a special "jig"
Hope this helps
John
Give Frank von Rosensteil a try I believe he has them avail NOS
I have made some using 1/2" steel tubing and fittings avail from NAPA but the radius of one of the bends requires a special "jig"
Hope this helps
John
Posted: Sat Apr 11, 2009 11:15 am
thx guys i will give these options a try ... its nice to talk to people who under stand what it is like to work on these trucks 
Posted: Thu May 14, 2009 12:23 am
I have sent for one NOS from Austrailia what a break...