Page 1 of 1
WTB Gun Ring Mounting plate
Posted: Mon Nov 08, 2010 10:05 pm
by Bill_Wolf
I need a plate for my M-36 Gun Ring. It is the spacer plate that goes from the back center arm to the M49 Ring. Pictured below.
I need part number C93814 or a good drawing so I can make one.
Thanks,
Bill
Re: WTB Gun Ring Mounting plate
Posted: Tue Nov 09, 2010 2:57 am
by Karoshi
Bill, I'd be happy to remove mine and make a paper template if you dont get sorted with a purchase.
regards
Karaoshi
Re: WTB Gun Ring Mounting plate
Posted: Tue Nov 09, 2010 9:51 am
by Bill_Wolf
Thank you for the offer Karoshi.
Let us wait a couple of days. Maybe someone has one laying around, brand new, primed and painted, in the bag with bolts.
Bill
Re: WTB Gun Ring Mounting plate
Posted: Tue Nov 09, 2010 1:11 pm
by Karoshi
Ok a couple of days then. Should be two a penny from the guy that has Jeeps in a crate at $50.
Re: WTB Gun Ring Mounting plate
Posted: Tue Nov 09, 2010 6:57 pm
by Bill_Wolf
Karoshi wrote:Ok a couple of days then. Should be two a penny from the guy that has Jeeps in a crate at $50.
That is exactly what I figured. Thanks for supporting my position.
Re: WTB Gun Ring Mounting plate
Posted: Thu Nov 25, 2010 12:52 am
by Cat Man
Bill,
There are several different adapters. I have a template for the one in your drawing.
Can't e mail it. Tried that before. I'll send a copy by surface mail after the holiday.
Cat Man
Re: WTB Gun Ring Mounting plate
Posted: Mon Nov 29, 2010 9:11 am
by Bill_Wolf
I want to Thank everyone who responded offering to make templates of the plate.
One of the members had one surplus to his need and I have purchased it. Hopefully it will work.
Again Thank you all. This certainly is a great group of helpful owners.
Bill