Fuel pump

KIH · Post by **KIH** » Tue Sep 23, 2008 5:27 pm

Hi - anyone tried to replace org. fuel pump with a 6 volt inline by pass pump. ? A friend of mine did recommend this cheap and easy solution but I would like some more opinions. If succesfully done - a NAPA no. or other type ID would be much appreciated.

Thanks

Bill_Wolf · Post by **Bill_Wolf** » Tue Sep 23, 2008 7:36 pm

Kim,

I used a 6 volt pump until I switched to 12 volt (still use the same type of pump in 12v version).

The 6V pump number is E8011

It looks like this:

Bill

dr deuce · Post by **dr deuce** » Tue Sep 23, 2008 7:54 pm

make sure you have fuel filter in front of the pump.

abn CCKW · Post by **abn CCKW** » Tue Sep 23, 2008 10:11 pm

whats the make and source of the pump ?

Bill_Wolf · Post by **Bill_Wolf** » Tue Sep 23, 2008 11:17 pm

abn CCKW wrote:whats the make and source of the pump ?

It is made by a company called Airtex.

http://www.airtexproducts.com/catalog.html

It should be available world wide from many sources.

Bill

KIH · Post by **KIH** » Wed Sep 24, 2008 5:34 am

Thanks everyone - I'm impressed