Hi,
I have just fitted the engine mounted compressor to my Bolster truck but I am concerned about lubrication. The plate just says to "lubricate compressor when vehicle is lubricated" . There is a screw in grease cap but no other obvious lubrication point, but I assume the piston needs lubrication?
Anybody got any ideas?
T-1 compressor by Westinghouse
-
- Corporal
- Posts: 16
- Joined: Sun Feb 08, 2009 2:24 pm
- Location: France
T-1 compressor by Westinghouse
One day I WILL have another DUKW! Now I do.
-
- Draftee
- Posts: 3
- Joined: Mon Nov 16, 2009 9:08 pm
Re: T-1 compressor by Westinghouse
I don't know about on this model but most have a plug in the base of the compressor if you post a picture it might be a little easier. What we normally do is feed oil off the motor into the compressor that way its changed out with the engine oil. Let us know how you go.
Chris
Chris
-
- Corporal
- Posts: 16
- Joined: Sun Feb 08, 2009 2:24 pm
- Location: France
Re: T-1 compressor by Westinghouse
This is it! I cannot find any holes or pipes which might accept oil feeds.
What do you think?
What do you think?
You do not have the required permissions to view the files attached to this post.
One day I WILL have another DUKW! Now I do.