ignition switch lock
-
gmcvert
- Private First Class
- Posts: 14
- Joined: Sat Nov 07, 2009 3:38 pm
- Location: France,nord,oxelaere
ignition switch lock
Hi, how change the ignition switch lock? a buy a new ign lock with key, and i whould like change this ign lock on a old complete ignition switch. it's for a close cab.
y a rien qui va mal !!
-
CC303
- Private
- Posts: 6
- Joined: Thu Mar 05, 2009 4:37 pm
Re: ignition switch lock
Hi,
It is possible BUT, you must have the older ignition switch with 2 connections on the back side, the switch with 3 connections cant be change for a Key.
The delco remy switch with 2 screws on the back has a little hole in the thteat that holds the ring, that holds the switch in place when it is mounted.
Hope i made it clear for you.
Kind regards Cornelis
It is possible BUT, you must have the older ignition switch with 2 connections on the back side, the switch with 3 connections cant be change for a Key.
The delco remy switch with 2 screws on the back has a little hole in the thteat that holds the ring, that holds the switch in place when it is mounted.
Hope i made it clear for you.
Kind regards Cornelis