Looky what we have here....

dr deuce · Post by **dr deuce** » Wed Nov 28, 2007 7:45 pm

The truck was either US Army (most likely) , ex-French Army (contract), or British Army though doubtful as it would have been delivered.

dr deuce · Post by **dr deuce** » Wed Nov 28, 2007 7:50 pm

"I did check the CF-351 book, it uses the same wheels as ACKW trucks, and learned something new that is probly useless to many."

Not to me. I find this stuff interesting. Like detective work pouring over manuals during the winter next to the wood stove....

Like the cab thing. I only found out about that 2 years ago at a truck show. Someone with a PU showed that to me.

dr deuce · Post by **dr deuce** » Wed Nov 28, 2007 8:14 pm

"Ask your wife if she would like to go shopping to an out of state mall."

Wife: "when are we going to get there?"
Me: "soon"
Wife: "We have been driving for hours"
Me: "It will be worth the trip..."
Wife: "And why did we have to take that huge trailer?"
Me: "er, ah for all the furniture, yeah the furniture"

joel gopan · Post by **joel gopan** » Wed Nov 28, 2007 9:37 pm

It has sort of worked for me going on 40 years.

dr deuce · Post by **dr deuce** » Fri Nov 30, 2007 5:56 pm

Sitting next to the wood stove today:

They made 1027 of them with the 4 speed and ~1461 with the 5 speed all of them with the 256 engine

Contract Form Qty
--------------------------------------
W398-QM-7572 X14046 451
W398-QM-7738 X14053 26
W398-QM-7538 X14053 443
W398-QM-7538 X14054 27
W398-QM-7900 X14084 56
W398-QM-7900 X14084 3

Probably only Joel and I are the only ones who love this detective (geek) work....

Bill_Wolf · Post by **Bill_Wolf** » Fri Nov 30, 2007 6:20 pm

So when are you picking it up?

Are you going to leave it yellow?

dr deuce · Post by **dr deuce** » Fri Nov 30, 2007 6:36 pm

You mean when are WE picking it up...

Gloss OD is pre-war

dr deuce · Post by **dr deuce** » Fri Nov 30, 2007 6:38 pm

Reading the GMC Master Parts book, the stoopid sheets moved the xfercase! All the driveshafts are different except for the little one to the rear rear axle!

joel gopan · Post by **joel gopan** » Fri Nov 30, 2007 8:28 pm

They didn't move the Transfer Case, the CCKWs moved the Wheelbase, axle spread is the same, along with Torque Rods.

Nick Bombini · Post by **Nick Bombini** » Fri Nov 30, 2007 9:19 pm

dr deuce wrote: Probably only Joel and I are the only ones who love this detective (geek) work....

Not quite, I love the detective work, I just don't have the materials to do it very thoroughly. Right now, my detective work is based off the internet

which does not really provide any info on the more uncommon stuff.

When my dad restored his 1948 Chevy pickup (it's a 1/2 ton Thriftmaster that we still have) he tracked part numbers through all of the changes and was able to buy brand new parts from GM in the 1980's. We still have all those books, so if I ever restore one of those trucks myself (which is very unlikely, I like big slow green machines), I will be able to track down parts easier.

So, what books and manuals do you guys use for your research? I'll keep my eyes open for them.

--Nick

joel gopan · Post by **joel gopan** » Fri Nov 30, 2007 9:37 pm

50+ year accumulation of rare army manuals, 60 years of contacts, rarely a day out of sight of army trucks since the end of WWII, and US Army training that agreed with me.

PS it makes you foolish after a while.It took me 10 years away from Army service to wear out my every day Corcoran Jump Boots, I had several pair left over. Everyone could hear me coming into buildings.

dr deuce · Post by **dr deuce** » Fri Nov 30, 2007 9:57 pm

I figured it out. The driveshafts are different because the xfer is centered like the CCKW, but because it has a shorter WB, 162 versus the 164 of the CCKW, the shafts are shorter.

joel gopan · Post by **joel gopan** » Fri Nov 30, 2007 10:04 pm

This is called "Tire Kicking".

joel gopan · Post by **joel gopan** » Fri Nov 30, 2007 10:14 pm

NOTE, the hood side panels are missing the louvres.
Page 12 AM #48 shows a glossy beauty of the ACKWX mit louvres and the same tires as the NOS 700X20 US Royal Mastergrip that I want to sell.
What a beautiful finish the Glossy GMCs had compared to the CCKW. They must have had to take off their boots to ride in it. The one in AM has a Glad Hand on the rear.

dr deuce · Post by **dr deuce** » Sun Dec 02, 2007 11:16 pm

No one bid on the old girl before the auction ended. Lets see ifn I get an email from the seller....

It appears that this one with the 4 sp may have the straight thru xfer as opposed to the under drive xfer like a 5 sp CCKW. I am still looking at the GMC Master Parts Manual for 1940-1942.

KEVINABR · Post by **KEVINABR** » Fri Dec 07, 2007 6:28 pm

hey its still a gorgeous truck and if i was state side i would have bid on her for sure

dr deuce · Post by **dr deuce** » Fri Dec 07, 2007 7:30 pm

I think I just bought an ACKWX-353......

John V Cliche · Post by **John V Cliche** » Fri Dec 07, 2007 7:35 pm

Sweet !!!!!!!!!!

506

dr deuce · Post by **dr deuce** » Mon Dec 10, 2007 7:33 pm

I have the serial number

ACKWX SN# 5596

John V Cliche · Post by **John V Cliche** » Mon Dec 10, 2007 7:36 pm

Steve
What was the production total for that model ?

john