Which one?
Joel
CCKW THAT FLEW
-
- Brigadier General
- Posts: 2493
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Hampden, ME
CCKW THAT FLEW
44 MB 356378- 54 M-38A1-41 CCKW 352-51 M-37-42TW6-45MBT-43 M1 BOMB LIFT (WEAVER)- RECORD SETTING HONOR GRADUATE Wheeled Vehicle Mechanics School, U.S. ARMY 1960 - US ARMY ORDNANCE SCHOOL 1962 - MVPA 1064 - RED BALL CHAPTER - PHONY VETERAN HEADHUNTER - ARMY FIXED & ROTARY WING MECHANIC/CREWCHIEF-STILL FIT WARBIRD COCKPITS
-
- Brigadier General
- Posts: 2367
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Tilton, NH
- Contact:
-
- Brigadier General
- Posts: 2493
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Hampden, ME
You are Correct, and win a bushel basket of bird droppings.
I have some of the rubber brake hoses made for the Air Portable at the splice.
Joel
I have some of the rubber brake hoses made for the Air Portable at the splice.
Joel
44 MB 356378- 54 M-38A1-41 CCKW 352-51 M-37-42TW6-45MBT-43 M1 BOMB LIFT (WEAVER)- RECORD SETTING HONOR GRADUATE Wheeled Vehicle Mechanics School, U.S. ARMY 1960 - US ARMY ORDNANCE SCHOOL 1962 - MVPA 1064 - RED BALL CHAPTER - PHONY VETERAN HEADHUNTER - ARMY FIXED & ROTARY WING MECHANIC/CREWCHIEF-STILL FIT WARBIRD COCKPITS
-
- Brigadier General
- Posts: 2400
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Pembroke NH
- Contact:
>I have some of the rubber brake hoses made for the Air Portable at the >splice.
I believe that they only made about 752 of these trucks. It always amazes me when I hear about the quanities of some spares like this....
I believe that they only made about 752 of these trucks. It always amazes me when I hear about the quanities of some spares like this....
Dr Deuce Over 50,000 driven miles in a CCKW
1942 CCKW closed cab shopvan
1943 CCKW closed cab cargo w/M32 MG mount
1944 CCKW open cab LeRoi Kompressor
1944 CCKW open cab F1 Aircraft fueler tanker
1945 CCKW open cab cargo w/artic cab
1942 Chev cargo
1942 Chev K51 Panel
1944 Chev M6 Bomb Truck
1942 GPW Jeep
http://home.comcast.net/~cckw/wsb/html/ ... 59870.html
1942 CCKW closed cab shopvan
1943 CCKW closed cab cargo w/M32 MG mount
1944 CCKW open cab LeRoi Kompressor
1944 CCKW open cab F1 Aircraft fueler tanker
1945 CCKW open cab cargo w/artic cab
1942 Chev cargo
1942 Chev K51 Panel
1944 Chev M6 Bomb Truck
1942 GPW Jeep
http://home.comcast.net/~cckw/wsb/html/ ... 59870.html
-
- Brigadier General
- Posts: 2595
- Joined: Thu Jun 08, 2006 1:10 am
- Location: San Antonio, Texas
Big trucks and small airplanes. 

52 M38 Willy's
Former owner and restorer of CCKW353 " Betty Boop"
proud father of a career Army officer/Blackhawk pilot/ War in Iraq veteran
Retired high school history teacher at Lt. Colonel Robert G. Cole CMH High School, Fort Sam Houston Texas
proud great grandson of four Confederate soldiers.
great great grandson of a War of 1812 veteran
great great great grandson of 2 American Revolutionary war veterans
Former owner and restorer of CCKW353 " Betty Boop"
proud father of a career Army officer/Blackhawk pilot/ War in Iraq veteran
Retired high school history teacher at Lt. Colonel Robert G. Cole CMH High School, Fort Sam Houston Texas
proud great grandson of four Confederate soldiers.
great great grandson of a War of 1812 veteran
great great great grandson of 2 American Revolutionary war veterans
-
- Brigadier General
- Posts: 2493
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Hampden, ME
Nothing amazing, I ordered them by part number in order to have parts for that one time someone needs one. Been around this game a long time, and one has to tie up money to earn money.
44 MB 356378- 54 M-38A1-41 CCKW 352-51 M-37-42TW6-45MBT-43 M1 BOMB LIFT (WEAVER)- RECORD SETTING HONOR GRADUATE Wheeled Vehicle Mechanics School, U.S. ARMY 1960 - US ARMY ORDNANCE SCHOOL 1962 - MVPA 1064 - RED BALL CHAPTER - PHONY VETERAN HEADHUNTER - ARMY FIXED & ROTARY WING MECHANIC/CREWCHIEF-STILL FIT WARBIRD COCKPITS
-
- Master Sergeant
- Posts: 30
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Norway
Nearly flew
GMCs and experiments
In february 1955, emergency arresting gear was installed for the first time on runways at two US Air Force Bases in Great Britain(Bentwaters AFB and Shepherd Grove AFB) for aircrafts in difficulties. Shortly afterwards, thrse installations were in actual operation to stop aircraft with tecnical faults(March and August 1955), but accidents occurred due to design faults, even leading to the total loss of one aircraft. A re-examination of the project was called for. It was decided to proceed with experimental test in order to determine and remedy deficiencies in the system. Research was carried out using a USAF CCKW353 (registration no:4669881) especially fitted out for this purpose. A triangular-shaped metal frame was welded to the front of the truck and fitted with and undercarriage, various panels, and load attaching systems from a Republic F 84 F, so as to simulate an actual aircraft as closely as possible. Ballast made of sheets of PSP perforated plate were loaded on the loader body. The total weight of the vehicle was between 6 and 9 tons, depending on the amount of ballast. Finally, 6 JATO rockets with a unit trust of 454 kg were fixed to the back of the unit to give the required acceleration, and 4 others at the front to ensure braking should the arresting gear malfunction. The machine was tested four times. During the last test, the device was fitted with additional fuel tanks and weighed 9 tons. It hit the arresting gear at 169 km/h and stopped over 185 meters.

Arne
In february 1955, emergency arresting gear was installed for the first time on runways at two US Air Force Bases in Great Britain(Bentwaters AFB and Shepherd Grove AFB) for aircrafts in difficulties. Shortly afterwards, thrse installations were in actual operation to stop aircraft with tecnical faults(March and August 1955), but accidents occurred due to design faults, even leading to the total loss of one aircraft. A re-examination of the project was called for. It was decided to proceed with experimental test in order to determine and remedy deficiencies in the system. Research was carried out using a USAF CCKW353 (registration no:4669881) especially fitted out for this purpose. A triangular-shaped metal frame was welded to the front of the truck and fitted with and undercarriage, various panels, and load attaching systems from a Republic F 84 F, so as to simulate an actual aircraft as closely as possible. Ballast made of sheets of PSP perforated plate were loaded on the loader body. The total weight of the vehicle was between 6 and 9 tons, depending on the amount of ballast. Finally, 6 JATO rockets with a unit trust of 454 kg were fixed to the back of the unit to give the required acceleration, and 4 others at the front to ensure braking should the arresting gear malfunction. The machine was tested four times. During the last test, the device was fitted with additional fuel tanks and weighed 9 tons. It hit the arresting gear at 169 km/h and stopped over 185 meters.

Arne
-
- Captain
- Posts: 198
- Joined: Thu Jun 08, 2006 1:10 am
- Location: PA
- Contact:
So the JATO powered CCKW officially settles the 'how fast do CCKW's go' question.
Can you e-mail me that pic??? Its great.
ihave4labs@yahoo.com
Can you e-mail me that pic??? Its great.
ihave4labs@yahoo.com
42 GPW
43 CCKW -A1
Bantam 1/4 ton Trailer
45th Infantry Division Renenactor
43 CCKW -A1
Bantam 1/4 ton Trailer
45th Infantry Division Renenactor