Wanted: Steel bodied Ben Hur tail light brackets
-
- Brigadier General
- Posts: 2367
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Tilton, NH
- Contact:
Wanted: Steel bodied Ben Hur tail light brackets
Lookiing for Steel bodied Ben Hur tail light brackets.
New or Very Good used.
They look like this
Thanks,
Bill
New or Very Good used.
They look like this
Thanks,
Bill
Last edited by Bill_Wolf on Wed Jun 11, 2008 4:46 pm, edited 1 time in total.
1945 GMC DUKW
1942 Chevy 125 Crash Truck from Dow AAFB,
1944 Chevy 325 Fire Truck
1942 WC-54 Ambulance
1944 M29C Weasel (x6)
1945 CCKW 353 A2 Open Cab "Air-portable"
1943 M5 High Speed Tractor
1942 Sperry Searchlight setup with GE Generator
1942 M-1 Fruehauf Searchlight Trailer (G221)
1942 M-17 Fruehauf Quad 50 Trailer (G221)
1942 M-10 Ammo Trailer (x3)
194? Steel Ben Hur (x4) 194? Wood Ben Hur (x2)
1945 Case VAIW-3 Aircraft Tug
1943 Case VAI USAAF with Mower
1944 Clark CA-1 Airborne Dozer
1944 PE-95G, 1944 PE-99B
1942 Chevy 125 Crash Truck from Dow AAFB,
1944 Chevy 325 Fire Truck
1942 WC-54 Ambulance
1944 M29C Weasel (x6)
1945 CCKW 353 A2 Open Cab "Air-portable"
1943 M5 High Speed Tractor
1942 Sperry Searchlight setup with GE Generator
1942 M-1 Fruehauf Searchlight Trailer (G221)
1942 M-17 Fruehauf Quad 50 Trailer (G221)
1942 M-10 Ammo Trailer (x3)
194? Steel Ben Hur (x4) 194? Wood Ben Hur (x2)
1945 Case VAIW-3 Aircraft Tug
1943 Case VAI USAAF with Mower
1944 Clark CA-1 Airborne Dozer
1944 PE-95G, 1944 PE-99B
-
- Brigadier General
- Posts: 2367
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Tilton, NH
- Contact:
Tail Light Brackets...FOUND!
I finally found someone with taillight brackets for a Steel bodied Ben Hur.
Brent Mullins has the NOS available. They were $15 each. While they are 1953 replacements they look exactly like the originals.
I am now a Happy Camper.
Bill
Brent Mullins has the NOS available. They were $15 each. While they are 1953 replacements they look exactly like the originals.
I am now a Happy Camper.
Bill
Last edited by Bill_Wolf on Sun May 07, 2006 12:43 am, edited 1 time in total.
1945 GMC DUKW
1942 Chevy 125 Crash Truck from Dow AAFB,
1944 Chevy 325 Fire Truck
1942 WC-54 Ambulance
1944 M29C Weasel (x6)
1945 CCKW 353 A2 Open Cab "Air-portable"
1943 M5 High Speed Tractor
1942 Sperry Searchlight setup with GE Generator
1942 M-1 Fruehauf Searchlight Trailer (G221)
1942 M-17 Fruehauf Quad 50 Trailer (G221)
1942 M-10 Ammo Trailer (x3)
194? Steel Ben Hur (x4) 194? Wood Ben Hur (x2)
1945 Case VAIW-3 Aircraft Tug
1943 Case VAI USAAF with Mower
1944 Clark CA-1 Airborne Dozer
1944 PE-95G, 1944 PE-99B
1942 Chevy 125 Crash Truck from Dow AAFB,
1944 Chevy 325 Fire Truck
1942 WC-54 Ambulance
1944 M29C Weasel (x6)
1945 CCKW 353 A2 Open Cab "Air-portable"
1943 M5 High Speed Tractor
1942 Sperry Searchlight setup with GE Generator
1942 M-1 Fruehauf Searchlight Trailer (G221)
1942 M-17 Fruehauf Quad 50 Trailer (G221)
1942 M-10 Ammo Trailer (x3)
194? Steel Ben Hur (x4) 194? Wood Ben Hur (x2)
1945 Case VAIW-3 Aircraft Tug
1943 Case VAI USAAF with Mower
1944 Clark CA-1 Airborne Dozer
1944 PE-95G, 1944 PE-99B
-
- Brigadier General
- Posts: 2493
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Hampden, ME
They look like my originals, there may be a difference in ones made by Bantam, but most look like the NOS in the PIC.
Joel
Joel
44 MB 356378- 54 M-38A1-41 CCKW 352-51 M-37-42TW6-45MBT-43 M1 BOMB LIFT (WEAVER)- RECORD SETTING HONOR GRADUATE Wheeled Vehicle Mechanics School, U.S. ARMY 1960 - US ARMY ORDNANCE SCHOOL 1962 - MVPA 1064 - RED BALL CHAPTER - PHONY VETERAN HEADHUNTER - ARMY FIXED & ROTARY WING MECHANIC/CREWCHIEF-STILL FIT WARBIRD COCKPITS
-
- Master Sergeant
- Posts: 32
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Westminster, MD
-
- Private
- Posts: 7
- Joined: Thu Jun 08, 2006 1:10 am
Steel Bodied Ben Hur taillight brackets
I see you found some new ones. Are they different on a wood model Ben Hur? I just wondered because my wood model does not have any. If they are the same I would like to try and buy a set like you have.
-
- Brigadier General
- Posts: 2367
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Tilton, NH
- Contact:
They are very different on the wood Ben Hur. I will post a picture later today.
Bill
Bill
1945 GMC DUKW
1942 Chevy 125 Crash Truck from Dow AAFB,
1944 Chevy 325 Fire Truck
1942 WC-54 Ambulance
1944 M29C Weasel (x6)
1945 CCKW 353 A2 Open Cab "Air-portable"
1943 M5 High Speed Tractor
1942 Sperry Searchlight setup with GE Generator
1942 M-1 Fruehauf Searchlight Trailer (G221)
1942 M-17 Fruehauf Quad 50 Trailer (G221)
1942 M-10 Ammo Trailer (x3)
194? Steel Ben Hur (x4) 194? Wood Ben Hur (x2)
1945 Case VAIW-3 Aircraft Tug
1943 Case VAI USAAF with Mower
1944 Clark CA-1 Airborne Dozer
1944 PE-95G, 1944 PE-99B
1942 Chevy 125 Crash Truck from Dow AAFB,
1944 Chevy 325 Fire Truck
1942 WC-54 Ambulance
1944 M29C Weasel (x6)
1945 CCKW 353 A2 Open Cab "Air-portable"
1943 M5 High Speed Tractor
1942 Sperry Searchlight setup with GE Generator
1942 M-1 Fruehauf Searchlight Trailer (G221)
1942 M-17 Fruehauf Quad 50 Trailer (G221)
1942 M-10 Ammo Trailer (x3)
194? Steel Ben Hur (x4) 194? Wood Ben Hur (x2)
1945 Case VAIW-3 Aircraft Tug
1943 Case VAI USAAF with Mower
1944 Clark CA-1 Airborne Dozer
1944 PE-95G, 1944 PE-99B
-
- Private
- Posts: 7
- Joined: Thu Jun 08, 2006 1:10 am
Thanks I would like to see the pictures. Is there any other major differences between the two? I purchased a Parts List and Maintenance Manual TM-10-1471 and it does not show anything about the wood model. Is there another manual or book that shows them with more detail?
Thanks again. The one manual was all I could find.
Thanks again. The one manual was all I could find.
-
- Corporal
- Posts: 18
- Joined: Thu Jun 08, 2006 1:10 am
- Location: The Netherlands
- Contact:
Re: Steel Bodied Ben Hur taillight brackets
[quote="citizensoldier"]Are they different on a wood model Ben Hur?[/quote]
Here is your picture, mvg. Dirk
http://lwdparts.dominodeveloper.net/mem ... BenHur.jpg
Here is your picture, mvg. Dirk
http://lwdparts.dominodeveloper.net/mem ... BenHur.jpg
-
- Brigadier General
- Posts: 2367
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Tilton, NH
- Contact:
-
- Private
- Posts: 7
- Joined: Thu Jun 08, 2006 1:10 am
1 ton Ben Hur wood model
Thanks for posting the picture. I was able to find the tail light brackets,all new metal for putting the wood body together.
Now all I need is the top bow brackets but I can probably make them and the lunnette eye. Anybody know where I can find one?
Now all I need is the top bow brackets but I can probably make them and the lunnette eye. Anybody know where I can find one?
-
- Brigadier General
- Posts: 2367
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Tilton, NH
- Contact:
-
- Private
- Posts: 7
- Joined: Thu Jun 08, 2006 1:10 am
Ben Hur trailer parts
I found a old farmer that had a wood body trailer rotting away in a field. The only thing usable was the taillight brackets and a piece of the parking brake lever. Someone cut the lunnete bracket off of it and welded a modern hitch on. that is what I was after in the first place.
I found all new NOS metal and tail lights at the Ohio , Findlay show. I have the guys card out in the shop and will post it in the future. He said he baught a wharehouse full of stuff years ago and they were in with the stuff.He has more sets if anyone needs a set. I found a NOS front wheel assembly (rubber tire type) from ABlinn.
I purchase the lunette eye casting on ebay. Found a good set of rims in a junk yard off of a old stake truck. I bought NOS springs and a axle from Joel Copan on this site. Its been about 3 years of digging and asking but stuff is showing up.
I have been told that there may be someone with a lunnette eye in Dayton this year but I am not sure I can make it. Anybody going?
I found all new NOS metal and tail lights at the Ohio , Findlay show. I have the guys card out in the shop and will post it in the future. He said he baught a wharehouse full of stuff years ago and they were in with the stuff.He has more sets if anyone needs a set. I found a NOS front wheel assembly (rubber tire type) from ABlinn.
I purchase the lunette eye casting on ebay. Found a good set of rims in a junk yard off of a old stake truck. I bought NOS springs and a axle from Joel Copan on this site. Its been about 3 years of digging and asking but stuff is showing up.
I have been told that there may be someone with a lunnette eye in Dayton this year but I am not sure I can make it. Anybody going?
-
- Brigadier General
- Posts: 2367
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Tilton, NH
- Contact:
Thanks,
I now think I know who you mean on the metal parts. He was at Aberdeen, Weare, and then Gilbert. NOS stuff in the box. As I remember he also had lots of 6 volt BO rear bulbs and a ton of Ben Hur rear wiring harnesses. Unfortunately they were rusty.
There were 3 people at Gilbert last year who had used complete hitch assemblies. I did not need anything so I did not get names.
Bill
I now think I know who you mean on the metal parts. He was at Aberdeen, Weare, and then Gilbert. NOS stuff in the box. As I remember he also had lots of 6 volt BO rear bulbs and a ton of Ben Hur rear wiring harnesses. Unfortunately they were rusty.
There were 3 people at Gilbert last year who had used complete hitch assemblies. I did not need anything so I did not get names.
Bill
Last edited by Bill_Wolf on Tue Oct 24, 2006 9:25 pm, edited 1 time in total.
-
- Sergeant
- Posts: 20
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Blackwater, MO
- Contact:
Now I am going to have to take pictures of my Ben Hur I just bought out of a field 2 weeks ago. It is a steel ben-hur but the taillight brakets are completely different. They are two piece? I have no reason to believe that they arent origonal because the B.0. taillight is still mounted to it and the famer I got it from (ww2 vet) said that he never changed anything on it. Plus the angled brakets on it are welded to the body. Any ideas? Ill get pics in a day or so so everyone can see what im talking about.
Greg
Greg
84th ID "Railsplitters" Reenacted
*42 cckw closed cab
*43 cckw open cab cargo
*42 GPW
*42 cckw closed cab
*43 cckw open cab cargo
*42 GPW
-
- Lieutenant Colonel
- Posts: 981
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Kennebunkport, Maine
Hi Bill
The gentleman with the NOS Ben Hur parts you are referring to I believe is Roger O'Dell 937-780-6300 He is located in Ohio.
And yes he was at Gilbert again this year ,he said he does mail order as well.
Hope this helps
John
The gentleman with the NOS Ben Hur parts you are referring to I believe is Roger O'Dell 937-780-6300 He is located in Ohio.
And yes he was at Gilbert again this year ,he said he does mail order as well.
Hope this helps
John
42 Chevy G7117
44 Ford M20 armored car
44 CCKW 353 A1 660 gal Tanker
45 CCKW 353 B2 Air-portable
Ben Hur 1 ton trailer
MVPA#26900
44 Ford M20 armored car
44 CCKW 353 A1 660 gal Tanker
45 CCKW 353 B2 Air-portable
Ben Hur 1 ton trailer
MVPA#26900